Genie Z™-34/22 DC & Bi-Energy Рабочие платформы AeriaL
Характеристики продукта
Features
Standard features
Size
• 40 feet 6 inches（12.52 meters）Working height
• 22 ft 3 in（6.78 meters）Extend horizontally
• 15 feet（4.57 meters）Up and across the gap
• 500 pounds（227 kg）Bearing capacity
Performance
• 4 feet（1.22 meters）Short arm with 139°The scope of work
• Self-levelling work platform
• Hydraulic rotary working platform
• Full Scale Hall-Effect Handle Control
• Thumb rocker steering
• Travel confirmation
• ACPower cord to work platform
• Trumpet
• Timer
• Tilt alarm
• Descent and Travel Alarm
• Alarm component
• 355 degrees of non-continuous turntable rotation
• Lock the turntable side cover（Dual energy only）
• Zero tail swing
• ThroughCECertified gravity sensing system
Power
• 48 volt deep cycle battery
• 24V DC auxiliary power
• RandomTier IVEmission standardsKubota 13.Three horsepower（9.9 kW）Provide power to DC engine（Dual energy models only）
• Battery level display
• Universal Intelligent Charger for 30 Amp Storage Battery
• Battery low interrupt operation
Easily configured to meet your need
Platform options
• Steel 4 '8（1.42 meters）（Standard type）
• Steel 3 '10（1.17 meters）
Short arm
• 4 feet（1.22 meters）The short arm of
Power
• 48V DC power supply
Drive
• Two-wheel drive
Tire options
• Industrial pneumatic tire（Standard type）
• Non-marking pneumatic tyre for industrial up（DCModel）
Options and accessories
Performance options
• Platform revolving door
• Air pipe to working platform
• Power connection to platform（Includes a plug、Socket、Work cut-off protection）
• Work light assembly（2 for chassis mounting；2 installed on platform）
• Aircraft anti-collision assembly(1,2) （RJ Model is not available）
• Biodegradable hydraulic oil(2)
• Harsh environment resistant component(2) （Comprises a cylinder protective sleeve，Arm dust assembly，Floor and platform control box door panel）
• Work cut-off protection
• GPS Tracking system(3) （GPS Module provides machine positioning and operating information）
• Lockable table control box cover
• Tool tray
• Staff protection alarm system（OPA）
Power options
• AGMMaintenance-free battery (2)
• Low temperature automatic cut-off
• Engine heating（Limited dual-energy model）
Параметр продукта
| Model | Z™-34/22 DC | Z™-34/22 DC Bi-Energy | ||
| Size | Parameter | Unit | ||
| Maximum working height* | 12.52 | 12.52 | m | |
| Maximum platform height | 10.52 | 10.52 | m | |
| Maximum horizontal extension | 6.78 | 6.78 | m | |
| Maximum span clearance | 4.57 | 4.57 | m | |
| Platform | Length | 0.76 | 0.76 | m |
| Width | 1.42 | 1.42 | m | |
| Storage height | 2.00 | 2.00 | m | |
| Storage length | 5.64 | 5.64 | m | |
| Storage height | 2.26 | 2.26 | m | |
| Storage length | 4.08 | 4.08 | m | |
| Width | 1.73 | 1.73 | m | |
| Wheelbase | 1.88 | 1.88 | m | |
| Ground clearance-Center | 0.15 | 0.15 | m | |
| Performance | ||||
| Bearing capacity | 227 | 227 | Kilogram | |
| Platform rotation | 180° | 180° | ||
| The short arm rotates vertically | 139° | 139° | ||
| Rotate the turntable | 355°Discontinuous | 355°Discontinuous | ||
| Turntable tail swing | 0 | 0 | ||
| Drive speed-Storage* | 6.4 | 6.4 | Kilometer/Hour | |
| Drive speed-Rise** | 1.1 | 1.1 | Kilometer/Hour | |
| Gradeability-Storage*** | 30% | 30% | ||
| Turning radius-Inside | 1.75 | 1.75 | m | |
| Turning radius-Outside | 4 | 4 | m | |
| Control | 24VDC proportional control | |||
| Tire-Solid rubber without impression | 0.23x0.37 | 0.23x0.37 | m | |
| Power | ||||
| Power source | 48 volts straightFlow （8 X 6 volt batteries，315 ampere-hour capacity） |
48 Vdc（8 X 6 volt batteries，315安时 容量） Kubota 13.Three horsepower（9.9 kW）柴油 机驱动的发电机 |
||
| Auxiliary Power Unit | 24 VDC | |||
| Hydraulic tank capacity | 15.1 | 15.1 | Liter | |
| Fuel tank capacity | —— | 35.2 | Liter | |
| Noise&Vibration level | ||||
| Sound pressure level（Ground control） | <70 | <70 | Decibel | |
| Sound pressure level（Platform control） | <70 | <70 | Decibel | |
| Vibration | <2.5 | <2.5 | m/s2 | |
| Weight**** | 5179 | 5632 | Kilogram | |
