Genie TZTM-50 Рабочие платформы AeriaL
Характеристики продукта
Extreme reach and operating range with industry-leading design and performance
The Gini Trailer equipped Aerial Vehicle is an excellent value for equipment that can reach high places.。 TZ-50 offers industry-leading reach and operating range and the highest towing speed。TZ-The 50 also offers many unique features,Uch as hydraulic outriggers., Automatic machine level adjustment，And optional DC/Gasoline hybrid engine。
135-degree telescopic boom extension operating range
4 feet 1 inch (1.25 meters)The telescopic arm of the allows you to position the platform above or below the horizontal。
And is convenient to transport
TZ-50 has an adequate 2 ft.（50 mm）The ball and a triple hitch are handy for towing.。A variety of hook sockets are available.。Gini's maximum speed is 60 miles per hour./Hour (97 kilometers/Hour) ，The highest in the industry，Fast delivery to work location。
Double guide wheel
Heavy duty guide wheels allow precise positioning of the machine during installation and transport。
Anti-sinking pad of outrigger
The outrigger anti-sinking pad effectively disperses the weight of the machine.。Non-marking anti-trap pad is available as an option。
Clear and understandable control
The floor and bench controls are very easy to master.，Use icons to simplify operation。
Automatic levelling system(Patent pending)
The unique Gini Auto Leveling System is“Self-leveling”Yes，It's allTZ-Standard on the 50 model。Industry-leading 10 degree leveling capability，Allows the operator to hydraulically adjust the supports and automatically adjust the horizontal position of the machine。When the operator adjusts all four supports simultaneously，The machine can be set up in 60 seconds.。.
The system can automatically adjust the horizontal position of the machine to 1 degree in all directions.。The slope sensor will be in the range of over level 2,.Alarm at 5 degrees，This built-in error margin reduces the hassle of the slope sensor.，However, this situation often occurs on other aerial work vehicles equipped with trailers.。This feature increases productivity.，And make GiniTZ-50 ahead of other competitors。
Options and accessories
Driving and adjustment options
The Ride and Adjust options are available when the machine is in the lowest position，Drive on the workbenchTZ-The function of 50。While in the storage position，Provide the deployment of the stand on the workbench，Shrink adjustment，And an automatic level adjustment function。
Mixed DC/Gasoline option
TZ-50 with mixed DC/Petrol engine option，Allow the machine to be charged in an off-site location。.
Table rotation
The hydraulic rotation mechanism allows the operator to rotate the table 80 degrees horizontally from all directions.。
Standard Features 55 ft 6 in (16.92 meters) The working height of
29 ft 2 in (8.9 meters) An extension of work
Short arm
Hydraulic outrigger
Outrigger interlock
Self-leveling system
Combination hitch，A height-adjustable belt 2” Bolt hook connector system for ball joint
Variable speed control system
AC power connected to the workbench
Hydraulic Oscillating Brake
Parking brake
Tilt alarm/Sensor
Double guide wheel
Chronograph
Options and accessories
Direct current/Gasoline hybrid
Driving and tuning options with large battery capacity
Spare tire
Charging indication
Fluorescent tube box
Hydraulic Rotary Table
Traceless outrigger anti-sinking pad
Operate the warning lamp assembly (Flashing beacon)
Tool box
25/16 feet (6 cm) Spherical connection
2 1/2 feet (6.35 cm) I.D. Pivot ring connection
ＵShaped connection
Meet the standard
ANSI A92.2
CAN -C225-M88
OptionalCEStandard
AS 1418.10
PB-10-611-03
Параметр продукта
| Model | TZTM-50 | |||
| Project | Parameter | Unit | ||
| Working height* | 17.09 | m | ||
| Work platform height | 15.09 | m | ||
| Entrance height | 0.51 | m | ||
| Extend horizontally | 8.89 | m | ||
| Clear the stretch | 7.04 | m | ||
| Spanning height | 6.71 | m | ||
| Platform | ||||
| Length | 0.68 | m | ||
| Width | 1.12 | m | ||
| Storage | ||||
| Height | 2.0 | m | ||
| Length | 7.16 | m | ||
| Width | 1.68 | m | ||
| Ground clearance-Center | 0.25 | m | ||
| Leg fulcrum | Length | 4.37 | m | |
| Width | 4.37 | m | ||
| Performance | ||||
| Bearing capacity(ANSI,CSA) | ||||
| Standard | 227 | Kilogram | ||
| Rotating platform | 227 | Kilogram | ||
| Bearing capacity(CE) | Standard | 200 | Kilogram | |
| Rotating platform | 200 | Kilogram | ||
| Short arm | 1.25 | m | ||
| Short arm operating range | 135° | |||
| Self-levelling work platform | 2.5°Standard | |||
| Rotary Work Platform Option | 160°Hydraulic | |||
| AC line to work platform | Standard | |||
| Rotate the turntable | 359°Discontinuity | |||
| Leveling performance of outrigger | 10° | |||
| Drive speed | 1.37 | Kilometer/Hour | ||
| Gradeability** | 20% | |||
| Traction speed | 97 | Kilometer/Hour | ||
| Towing weightANSI,CSA | 181 | Kilogram | ||
| Towing weightCE | 100 | Kilogram | ||
| Surge and parking brake | Standard | |||
| Control | Variable speed system | |||
| Tire-ANSI,CSA | ST 225/75 R15 | |||
| Tire-CE | 215 R14C | |||
| Coupling device | 2 inches(5.08 cm)Standard coupling | |||
| Power | ||||
| Power source | 24 VDC(4 X 6 Volt 225 Amp Hour Batteries) | |||
| Power source | Drive options | 24 VDC(4 X 6 Volt 244 Amp Hour Batteries) | ||
| Options | Mixed direct current/Gasoline Honda 5.5 HP(4.1 kW) | |||
| Fuel tank capacity | 3.6 | Liter | ||
| Hydraulic tank capacity | 18 | Liter | ||
| Hydraulic system capacity | 30 | Liter | ||
| Weight*** | ||||
| ANSI,CSA,Australia | 1,996 | Kilogram | ||
| CE | 2,025 | Kilogram | ||
