ZHENGZHOU YUTONG YTD8B Bulldozer Бульдозер
Характеристики продукта
Breakthrough design of conventional caterpillar bulldozer. The drive sprocket is separate from the travel frame, which is arranged axially in line with final drive, steering and braking clutch and central transmission, and, the caterpillar is designed with triangular arrangement to eliminate the impact load of ground directly transmitted to the drive sprocket, so that the service life of the transmission system is increased by 30%.
The travel system is provided with elastic suspension so that the idler overrides the obstruction. The continuous sub-suspension may be handled against the ground through its floating action. The bumper absorbs the ground impact load to reduce the impact load to chassis by 50% approximately, to improve traveling smoothness and operator's comfort, to increase the contact area between caterpillar and ground (by 15% approximately) and to improve traction performance of the complete vehicle. The pivoting articulation between the travel frame and vehicle frame replaces conventional splayed beam structure and improves the connecting rigid of travel frame and vehicle frame. The gravity center of the complete vehicle may be easily adjusted to accommodate the operating requirements of equipment to the gravity center of the complete vehicle.
Параметр продукта
Item |
Parameters |
||
Model/Main parameter |
YTD8B/320 horsepower |
||
Operating mass of whole bulldozer (kg) |
Including rippe(Straight tilt blade) |
36800kg |
|
Encluding rippe(Straight tilt blade) |
32100kg |
||
Overall dimension of whole bulldozer (Length×width×height) |
Including rippe(Straight tilt blade) |
7751×3940×3549(mm) |
|
Encluding rippe(Straight tilt blade) |
6100×3940×3549(mm) |
||
Minimum turning radius |
Turning radius |
3150/5050 mm |
|
Flywheel power (hp/kW) |
320/235 |
||
Maximum traction (kN) |
388 |
||
Gradeability (°) |
纵30°/横25° |
||
Ground pressure (kPa)(Excluding ripper) |
93 |
||
Ground clearance (mm) |
556 |
||
Performance Parameters of |
Model/Type |
NTA855-C360S10/6-cylinder, in-line, four-stroke, turbocharged and intercooled, water-cooled |
|
Manufacturer / Country of Origin (Manufacturer) |
Chongqing Cummins Engine Co., Ltd/USA Cummins |
||
Applicable environmental / altitude (C0/m) |
-10—40/3000 |
||
Number of cylinders - Bore × Stroke mm |
6-140X152 |
||
Piston displacement L |
14 |
||
Rated power hp/kW |
345/257 |
||
Rated rotation speed r/min |
2100 |
||
Maximum torque/rotation speed N.m/rpm |
1353/1400 |
||
Torque reserve coefficient |
20% |
||
Lowest fuel consumption g/kW.h |
208g/kw.h |
||
Engine oil consumption g/kW.h |
MAX0.24L/h |
||
Starting method |
Electrical start |
||
Power of starter motor kW |
8 |
||
Generator model/country of origin (manufacturer) |
3078115 |
||
Voltage/current of generator V/A |
24/50 |
||
Type of air filter |
Dry type paper air filter |